James Anderson All articles
Tools & Workflow

One Side of A4: The Month I Wrote Down How My Work Actually Works

James Anderson
One Side of A4: The Month I Wrote Down How My Work Actually Works

Photo: Dinesh227, CC BY-SA 4.0, via Wikimedia Commons

In November I gave myself a rule that was almost aggressively unglamorous: every object that left my workshop got a manual. One side of A4. Plain language. No glossy photographs, no hard sell, no little icons of a crossed-out washing machine. Just a clear explanation of what the thing is, what it does, how to look after it, and what to do when it inevitably starts behaving oddly.

I make a mixed bag of things — small shelves, stools, repaired lamps, a coat rack that looks like it lost an argument — and I had always assumed the object more or less spoke for itself. It doesn’t. Or rather, it speaks in a language I know and the next person may not. Writing the manuals made that gap very obvious.

The rule was deliberately boring

The format was fixed. One sheet, printed or written by hand. A rough sketch was allowed. What mattered was that it covered the basics: what the object is for, how to use it, how to clean it, what not to do, and one or two likely fixes. For repaired items, I also noted what had been replaced and what was original. If I couldn’t fit it on one page, that was information too — usually that I hadn’t understood the object well enough myself.

The first ten were terrible. Not because the objects were complicated, but because I kept writing the sort of vague nonsense that sounds helpful until you actually need it. “Use sensibly.” “Wipe with a damp cloth.” “Adjust as required.” Those are not instructions. They are polite shrugging.

The first drafts were mostly fiction

What surprised me was how often the manual contradicted the object. I wrote “wipe with a damp cloth” on a stool that I had actually finished with oil. I described a shelf as “fixed with screws” when it had a hidden bracket and a very specific order of assembly. I wrote “simple to adjust” about something that needed a 10mm spanner and a bit of patience.

The manual was acting like a very calm inspector. It kept asking: is that true? Is that how you actually do it? Did you check? A few times I had to take an object back out of its wrapping and look at it properly. Once I found a joint that had worked loose. Another time I realised I had been assuming people would know which way up a particular bracket went, even though there was nothing on the object to suggest it.

That was the first real lesson: writing the obvious down is a good way of finding out what you have been skipping.

The gaps that embarrassed me

There were small embarrassments. I couldn’t remember which finish I had used on a batch of shelves from earlier in the year. “Probably Danish oil” is not a useful sentence in a manual. I started labelling bottles and keeping a note of finishes in the workshop diary. I also realised that some of my “adjustable” pieces needed a tool I hadn’t supplied. Now I either include the right spanner or say plainly what size is needed and where it goes.

Then there were the bits I had never thought to mention because they were obvious to me. Which way up. Where not to drill. How to carry it without putting pressure on the wrong joint. How to get the back panel off if you ever need to look inside. Not exactly thrilling reading, but the sort of thing that saves someone a frustrating afternoon.

One page forces you to decide what matters. You cannot hide behind a fifty-page service manual or a QR code that leads to a website nobody will visit in five years. You have to choose. A manual is not a warranty. It is a handover.

The unexpected readers

I thought I was writing for buyers, but I wasn’t — most of these things were not going to buyers at all. Some went to friends, some to a charity shop, some to neighbours, one to a repair café pile. The manual was really for whoever ended up with the object later: the person clearing a house, the person fixing a lamp, the person who inherits a stool and wonders why it has that strange notch in the leg.

That changed the tone. I stopped writing as if I were explaining something to a customer and started writing as if I were leaving a note for a stranger. Less clever, more useful. No jargon. No assumptions about what they already knew. Just the facts, the odd warning, and the one repair that is worth trying before anything else.

A neighbour told me the manual for a repaired lamp was the first time she had understood why the switch was on the flex rather than the base. That was not a compliment about my writing. It was a reminder that the maker’s normal is not everyone’s normal.

What I’m keeping

I’m keeping the one-page rule. It adds maybe fifteen minutes to a finished object, and it has already caught a few mistakes before they left the workshop. I now try to write the manual before the final sanding, because if I can’t explain the thing clearly by then, the design probably isn’t finished.

Not every object needs the same level of detail, but every object deserves a sentence or two that says what it is and how to keep it going. That feels like a small, practical sort of respect. Not for the maker’s ego, but for the future — for the person who will one day hold the thing and wonder how it works. The least I can do is leave them a page.

All Articles

Related Articles

Dark by Four: A Practical Sort of Daylight Plan for Winter Making

Dark by Four: A Practical Sort of Daylight Plan for Winter Making

Thirty Days, Nothing New: What Happens When You Ban Yourself From the Hardware Shop

Thirty Days, Nothing New: What Happens When You Ban Yourself From the Hardware Shop

The Page of Things I Didn't Make: Six Ideas I Parked on Purpose

The Page of Things I Didn't Make: Six Ideas I Parked on Purpose